UAL QA
BUILT FOR ACCURACY TIME SAVING FEATURES
HIGH-SPEED ELECTROMETER
The DoseView 3D Electrometer is a dual-channel,
fast-acquisition electrometer that continues
Standard Imaging’s renowned reputation
for precision and efficiency. Bias voltage can
be enabled independently per channel for
chamber/diode simultaneous operation. Low noise performance helps ensure post-processing operations are kept to a minimum.
ACCURATE, RELIABLE
EXRADIN ION CHAMBERS For over 40 years, Exradin’s quality has been recognized by the top research institutes and standards laboratories around the world. The DoseView 3D comes with two Exradin A28 Ion Chambers (0.125cc), producing sustained accuracy and confidence in your QA testing.
VARIABLE STEP
SIZE ACQUISITION
The DoseView 3D can be programmed to move in varying step sizes throughout a scan. Implement tighter steps toward the penumbra to account for increased variability without significantly increasing overall scan time.
EXPEDITE ACCURATE SET UP The Automatic Detector Alignment System places the center of all detectors at the same position relative to the water’s surface, allowing users to swap detectors without resetting isocenter/origins. Initial setup is performed with the crosshair alignment jig. This bracket system is compatible with Exradin Ion Chambers and supports chambers and diodes from most other manufacturers. This system ensures faster setup time and provides confidence in accurate leveling and beam center positioning.
AUTOMATICALLY
FIND BEAM CENTER
Once leveling is performed, the DoseView 3D
determines the center of a radiation field by
locating the field edges using an ion chamber or diode. This test can be performed at multiple depths to identify any issues with system leveling and/or gantry alignment.
INCREDIBLE, ALL NEW SOFTWARE DESIGN THE EASIEST, MOST INTUITIVE WATER PHANTOM SOFTWARE AVAILABLE
• A wireless connection to the hardware provides easy & convenient control
• Import scans from your previous water scanning systems for comparison & continuity. • Accuracy of system setup is confirmed with automatic checks that ensure detector centering and gantry angle positioning. • Scan queue setup and measurement is automated eliminating repetitive tasks and saving time.
QUEUES
A queue creation wizard helps you choose your scanning modality (photons, electrons or flattening filter free photons), modifiers, energies, field sizes and scan types. All combinations of your choices are created. No copying and editing individual scan groups. Make your scan queues in a matter of minutes…or less. Continuous scanning and multiple scan zones are available at no extra cost.
• Scan speed and step size automatically optimized according to dose rate.
• Guided beam scanning performing next sequential group of measurements in queue. • SmartSelect detects scans outside queue parameters and automatically deselects them. • Simple, yet powerful scan queue creation and editing.
• Easy export to TPS and CSV
SETUP
The Measure page has a setup wizard that takes you through the process of getting your tank ready to use. When all expander title bars have results in blue, you are ready to scan.
MEASURE
Scan queues are loaded into a queue runner. As scan data is acquired, it is immediately stored in a database for future access, analysis, and export. Raw scan data and the methods used to modify it are stored in the database, so you always know what your raw data looked like and always know how you processed it for your needs.
Relative Ionization (%)
ANALYZE
Comprehensive scan processing and analysis tools include profile centering, mirroring, symmetric averaging, shifting & normalization of profiles & depth doses, smoothing with boxcar & gaussian filters, and dose conversion using TG-51 and TRS-398.
Relative Ionization (%)
Depth Off-Axis Distance (cm)
www.standardimaging.com // +1 608 831 0025
ANNUAL QA
LIFT AND RESERVOIR CARTS
FULLY INTEGRATED WITH LIFT
AND RESERVOIR IN ONE
The DoseView 3D’s cart contains both an
electronic lift mechanism and 60 gallon (265 liter)
water reservoir, resulting in hassle-free storage
and setup. Additionally, a convenient storage area
holds the power supply and other accessories.
The lift and pump are powered by a single power
24/7 SUPPORT
Standard Imaging’s acclaimed customer service and support ensures an easy transition of the DoseView 3D into your QA workflow and will guide you through any issues that may arise in the future. Standard Imaging also provides 24/7 phone support for DoseView 3D in USA.
For more information on warranties and additional maintenance and support packages please contact your Standard Imaging Account Manager or regional distributor.
cable, and a power pass-through cable allows convenient connection to the water phantom.
EXTENSIVE ADJUSTMENTS CAPABILITIES
The Precision Positioning Platform provides an ideal medium for maneuvering the DoseView 3D. This added flexibility allows subtle X and Y axis movements up to ±12.5mm, phantom rotation of ±1° and positive engagement at 10°, 45°, and 90° intervals. Achieve consistent detector orientation during in-plane, cross plane and diagonal scans.
EFFICIENCY LIFT CART
An alternate, portable lift cart is also available. The electric lift table has a capacity of 900 pounds and is capable of over 15 inches of vertical travel.
DOSEVIEW 3D SPECIFICATIONS
Motion Control System
Travel Speed — 50 mm/s // Positioning Accuracy — ± 0.1 mm per axis // Positioning Repeatability — ± 0.1 mm per axis PC Communication — Wireless or wired via RS-232 // Control Method — PC or via wireless pendant
Water Phantom (acrylic tank only)
Outer Dimensions — [ length × width × height ] 683 mm x 692 mm x 542 mm
Scanning Dimensions — [ length × width × height ] 480 mm x 480 mm x 410 mm
Wall Thickness — 19 mm // Replaceable Fill/Drain Port
Lift Cart and Reservoir
Outer Dimensions — [ length × width ] 1247 mm x 762 mm // Vertical Range — 685 mm – 1185 mm (tank base to floor) Water Pump — Electric fill, gravity drain // Water Capacity — 60 gal (227 liters)
Fill Speed — 6-7 min // Drain Speed — 16-20 min
Precision Positioning Platform
X / Y Fine Adjustment — ±12.5 mm // Fine Rotational Adjustment — ±1°
Discreet Engagement — 10°, 45°, and 90° intervals
DoseView 3D Electrometer
Channels — 2 // Bias Voltage — 0, ±150 to 450 (VDC) in 50 volt increments // Range — 2 pC – 999,999 nC
Resolution — 10 fC // Connector Type — Triaxial BNC or TNC (BNC unless specified)
Software/Computer Requirements
Operating System — Windows® 10 Professional, 64-bit Recommended
Runtime Environment — .NET 4.5.2 // Processor — Dual Core, 1 GHz; Quad Core, 2 GHz Recommended
Memory — 32-bit OS: 2 GB, 4 GB Recommended 64-bit OS: 4 GB, 8 GB Recommended
Hard Drive — 1 GB free space for initial software installation. Typically 2.5 MB/Year/Linac disk space growth. 25% free space Recommended.
Screen Resolution — 1440 x 900 or greater // CD-ROM Drive — 2X speed or greater
Connectivity — 9-pin serial RS-232 port or USB port with USB to RS-232 adapter
Microsoft® and Windows® are registered trademarks of Microsoft Corporation. Pinnacle3® is a registered trademark of Philips Electronics N.V. Eclipse™ and Halcyon™ are trademarks of Varian Medical Systems Inc. Monaco® is a registered trademark of Elekta AB.
Specifications subject to change without notice.
DoseView 3D REF 92260, DoseView 3D Lift and Reservoir Cart REF 72260
www.standardimaging.com // +1 608 831 0025
ANNUAL QA